LaserSoft Imaging

I'd like to be able to scan a large number of 35mm slides before processing them. From page 58 of the SF Ai 6 User's Manual I see that:

"SilverFast offers the output of 48 bit files as pure, uncorrected 'raw data format'. The corresponding selections for this kind of data are '48 bit HDR colour' and '16 bit HDR greyscale'. These two selections wil deliver the 'raw data' read by the hardware ?as is? (unchanged) as RGB file in uncompressed TIFF format."

but I don't see any reference in the manual as to how I would subsequently process them. Can I do so with Ai 6 and if so: 1. how do I open a raw image? 2. can I use all of the processing tools, including SDR dust and scratch removal?

Dear Dave

you would do so using SilverFast HDR (or HDR Studio / DC Pro / DC Pro Studio). That's actually why that scan modes are called HDR.

I hope I could answer your question.
Please don't hesitate to contact me again for further information on this topic.

Best regards and Merry Christmas
Sonny Noack
- Technical Support , LSI AG -

I'm trying to understand the differences between HDR and Ai.

Is it true that HDR and Ai are the same except:
1. Ai can scan an image from a scanner, e.g., Minolta Dimage Sacn Elite 5400) but HDR can't
2. HDR can read a Raw TIFF file bet Ai can't.

LSI_Noack wrote:Dear Dave

you would do so using SilverFast HDR (or HDR Studio / DC Pro / DC Pro Studio). That's actually why that scan modes are called HDR.

I hope I could answer your question.
Please don't hesitate to contact me again for further information on this topic.

Best regards and Merry Christmas
Sonny Noack
- Technical Support , LSI AG -