LaserSoft Imaging

I would like to set fix image properties like 10x15 cm, 600ppi and zoom of 420 for all frames detected with the auto frame recognition.

Besides that i don't understand the poor results from the auto frame recognition. Facebook is able to detect faces in pictures and silverfast is not able to detect fix square frames with ultra black borders between them? You have to work on this issue.

'Dear user,

When using SilverFast Ai Studio you can save frame settings in the frame menu. These can then be used as default values for created frames in the preferences' General tab.
This can include fixed zoom and Preset values.

Kind regards,
Arne

With your solution only ppi and zoom settings are saved. The format size still varies from image to image.

I use a frame holder for scanning 35mm negatives. Waht i want is the possibility to scan all my negatives with the same settings so that i get identical size and ppi values for each image like shooting with digital cameras.

The frame autodetection sould then center the defined fix frames around each found image.

This would speed up the scaning proccess.

The auto frame finding will always cause some variation.
You can try saving the settings and frame sizes as a Job through the JobManager.


Kind regards,
Arne

Other, far less capable software finds the frame boundaries, and is capable of doing so without making every scanned image a different size. This is a desirable feature and a very reasonable request.