LaserSoft Imaging

I use your soft since I bought my scanner canoscan 9000F.
I have the last version of the soft.
The problem I have is that when I select ISRD for all the pictures by scanning negativs, it doesn't do the job (with batch). The negativs are scanned but without correction but if I look to the scanner information window it does IR scanning. It only works with correction if I manualy scan one negativ after the other.
It takes a lot of time. Have you a solution

Best regards

Dear customer,

Please be aware that each scanframe has individual settings.
You need to activate iSRD for all frames or copy settings using the frame menu.

kind regards,
Arne Ketelhohn.

I do activate ISRD using copy in the frame menu.
If I verify the frames I see that ISRD is selected.
The way I use for the moment is that I click the frame and clik on Scan for every frame (one after the other).
It seems to work but sometimes the scanning stops and I must close the soft to be able to restart scanning.
Best regards

Does the scanner stop in mid-scan?
That would either suggest an issue with the data transfer or the scanner hardware itself.
Silverfast is only waiting for data while the scanner is operating.

kind regards,
Arne Ketelhohn.