Fuji PRO 800 Z
PostPosted: Sat Sep 04, 2010 2:07 am
by suspire
What NegaFix profile should I be using for this film?
- pro800z.jpg (71.59 KiB) Viewed 2263 times
thanks
Re: Fuji PRO 800 Z
PostPosted: Mon Sep 06, 2010 8:10 am
by LSI_Morales
Dear Suspire,
Since, there is no dedicated NegaFix profile for this filmtype, you might try using one of the profiles included for the Fuji Pro family and editing the curves to produce a perfect profile for this film type. Or the other option (perhaps even easier) is to try one of the other Fuji Iso 800 and edit its curves to accurately produce the tonalities you want to use with this film type.
Cheers
Re: Fuji PRO 800 Z
PostPosted: Mon Jul 11, 2011 1:59 pm
by Mustavio Fantastico
Do you plan to add a profile for Fuji Pro 800Z to NegaFix in a future update?
Re: Fuji PRO 800 Z
PostPosted: Mon Jul 11, 2011 2:30 pm
by LSI_Morales
Dear Mustavio,
There are no plans to add new NegaFix profiles into SilverFast. Unfortunately the targets used for the calibration of NegaFix profiles are not produced anymore. It means relatively modern emulsions are not included in the set of calibration targets.
In such cases we recommend to use an existing profile and change the existing curves to accomodate the new emulsion.
Check the following videos and documentation for details on how to proceed:
http://www.silverfast.com/download/docs/SF-NegaFix-en.pdfhttp://www.silverfast.com/showmovie/en.html?movien=301&mode=inline&hide=descCheers