LaserSoft Imaging

after I batch scan my negative film to HDR 48-Bit Colour, some of the images will need to be rotated. how can I use SF HDR to rotate the HDR 48-Bit Colour images without affecting the image in any other way whatsoever? what settings would I use?

example:
option-click the Auto-Adjust button to make sure all adjustments are off.
open and reset SCC, ACR, GANE and SRD.
select HDR 48-bit Colour.
set Scale to 100%.
set Output Resolution to the same as the original HDR image, or if using the Job Manager, make sure "Use original resolution" is checked.

does Positive/Negative (in the General panel) matter?

regards
gregory

If you are using "48bit (HDR)" as Scanmode, no colorchanges are calculated on the picture. Only size does matter, scale, dpi and rotation. The "Gamma [] use HDR" in options should be switched off too.
Pos/Neg has also no effect.

kind regards