HDRi RAW with iSRD - Workflow?
PostPosted: Mon May 25, 2015 2:12 am
New user with Ai Studio v. 8.5 (latest), and Nikon Super Coolscan 5000.
I want to digitize about 10,000 slides and later make adjustments in Capture 1 software. It seems logical to scan with 64 bit HDRi RAW, since this would give me the most flexibility in making adjustments later. I would also like to use iSRD to repair / remove dust and scratches.
First, is it possible to do both functions?
If so, what is the correct sequence / workflow? HDRi RAW first, then iSRD? or vice versa?
Would the file format be TIFF?
Is there any advantage to full resolution vs 1/4 resolution in the Scan Dimensions preset?
So far, I cannot get a RAW scan that also has the dust and scratches removed.
Would I be better served by another method -- Slide to auto enhance, plus an iSRD scan?
I want to digitize about 10,000 slides and later make adjustments in Capture 1 software. It seems logical to scan with 64 bit HDRi RAW, since this would give me the most flexibility in making adjustments later. I would also like to use iSRD to repair / remove dust and scratches.
First, is it possible to do both functions?
If so, what is the correct sequence / workflow? HDRi RAW first, then iSRD? or vice versa?
Would the file format be TIFF?
Is there any advantage to full resolution vs 1/4 resolution in the Scan Dimensions preset?
So far, I cannot get a RAW scan that also has the dust and scratches removed.
Would I be better served by another method -- Slide to auto enhance, plus an iSRD scan?