Page 1 of 1
PostPosted: Wed Feb 20, 2002 5:08 pm
by bonzo
When using the multiple scan technique with my Polaroid 4000 Sprintscan, I'm getting "ghosting" in the image. This has happened at both the 8 scan setting and the 4 scan setting. Is there a fix?
PostPosted: Fri Feb 22, 2002 10:34 am
by ilyons
On 2002-02-20 17:08, bonzo wrote:
When using the multiple scan technique with my Polaroid 4000 Sprintscan, I'm getting "ghosting" in the image. This has happened at both the 8 scan setting and the 4 scan setting. Is there a fix?
Yes, stop using multisample scanning. The feature is no longer available in SilverFast for the SS4000 since the scanner is not really suited to multiple passes - alignment is NOT good.
Ian
PostPosted: Sat Mar 02, 2002 5:41 am
by rsfoto
Hi Ian,
That is interesting what you say. How and where do I disable this? Could you send a Screenshot from the menu?
Thanks in advance
_________________
Rainer Ehlert
RS Fotografia
<font size=-1>[ This Message was edited by: rsfoto on 2002-03-02 05:41 ]</font>
PostPosted: Mon Mar 04, 2002 10:32 am
by ilyons
Rainer,
About half way down the page on the following link you will see a section on Multiple Sample feature. You can find the button on the vertical tool bar that resides on the left of the image preview window. There is a single Icon with a "1" shown. Each time you click it it will change to a new number, e.g. 4 then 16. If you click again it will return to "1". When it shows "1" multiple sample is OFF.
http://www.btinternet.com/~ian.lyons/sf ... astv51.htm