LaserSoft Imaging

Dear friends,

I recently bought Nikon coolscan Ls 50, and scanning 35 mm films and slides are excelent with no problems, but every time I try to scan 110 color negatives I do not get good scans, in other words; the scanned image is covered with a gray bluish color. I tried to do all sorts of color and brightness adjustmnets and image cropping but I do not get the same good scans as the 35 mm ones. I use the 35 mm film strip holder FH-3 to hold the 110 film by sometimes blocking the surroundings with a piece of black 35 mm film, and sometimes leaving them open, but I still cannot get good scans.
So, could anybody help me overcome this problem? and another thing, do you think changing the scanning software will solve the problem?.

Thank you very much.

Dear ayham

you might be interested in some little information about the Negafix tool uses and how to adjust / manipulate it the pre-settings given to best effect.

https://www.silverfast.com/show/negafix/en.html
does link a tutorial by Ian Lyons on this subject and a specific Ai Negafix guide in PDF format.

Also, please make sure you downloaded and installed the latest update for your version of SilverFast from our website.
You might experience that this already does solve your problem.

If you need to update a SilverFast Ai version, please do register with us at our website (cf. Support -> Registration):
https://www.silverfast.com/reg/en.html
After registering you will swiftly receive an automatically generated e-mail with the access data you will need for downloading the update.

However, if the problem persists and you like SilverFast support staff to help, please don't hesitate to us via the problem report form:
https://www.silverfast.com/problemreport/en.html

We do appreciate if you could paste a fresh copy of the SF_Logfile in the problem report.
Thanks in advance for your co-operation.