SE Plus for Nikon & Microtek?

[Ancestor]

I have a Nikon Coolscan IV ED for slide and filmstrip scanning and a Microtek i800 flatbed used for both document copying and multiple slide scanning. However moving up to Mac OSX 10.6 Snow Leopard has left me stranded as the Microtek software has not been upgraded, and Nikon has stopped supporting scanners. My search on the Lasersoft website suggests that Silverfast SE Plus supports both scanners and would suit my purposes without being too expensive or complicated. Will one download of SE Plus be able to service both scanners (obviously not simultaneously)? or is there a separate version required for each scanner? Any help or suggestions for making this transition would be most welcome.

[LSI_Morales]

Dear Ancestor,

You must check if your Microtek scanner is officially supported by SilverFast under the operating system you intend to work with. Then you must check if SilverFast SE Plus is available for the scanner in question (not all scanners have SE Plus).
If the previous searches where positive, you still need to purchase a separate version for each scanner. Each version can be purchased at a discount once you have a first version. Further details are explained on our online store http://www.silverfast.com/show/store/en.html

Cheers