PostPosted: Fri Apr 05, 2002 8:50 pm
LSI_Martin wrote:
The calibration is an option on this scanner. When you ordered SilverFast with calibration, you should have received a second serial number, which will allow you to unlock the calibration and make the icon visible. Please click the "i"- button in the upper left corner of your pre-scna window, and select "credits" and "upgrade". Then, please replace your basic serial number with the calibration- serial number and click "ok". The calibration icon will appear.
------------------------------------------------------------------------
Thanks for your reply, however it hasn't solved my problem. Perhaps the following info will help.
The Silverfast disc I received with the Nikon 4000 is version 5.5. When I installed it the menu listed it as v5.5 Or12. The window accessed by the 'info' button said:
SilverFast E-5.5 Or12 Serial
SU-Nikon LS-4000
Licensed to: Job
I downloaded the free upgrade from your web site, installed that, and the menu now lists it as v5.5.2R02. The window accessed by the 'info' button now says:
SilverFast E-5.5.2r02 Serial
SU-Nikon LS-4000
Licensed to: ADF, Job
However at no time was there any reference to optional calibration, nor did I receive another serial number. So how do I access this option?
The only reference I can find anywhere is at http://www.lasersoft-imaging.com/produc ... 00/en.html, where there is the offer of optional calibration for $161. Is this what you are referring to? If so, is it downloadable? And from where? On the web site I can only find ways of having software physically shipped, which is impractical since I am in Moscow. I already have a target transparency, so the best option is download if at all possible.
Thanks,
Jeremy Nicholl
The calibration is an option on this scanner. When you ordered SilverFast with calibration, you should have received a second serial number, which will allow you to unlock the calibration and make the icon visible. Please click the "i"- button in the upper left corner of your pre-scna window, and select "credits" and "upgrade". Then, please replace your basic serial number with the calibration- serial number and click "ok". The calibration icon will appear.
------------------------------------------------------------------------
Thanks for your reply, however it hasn't solved my problem. Perhaps the following info will help.
The Silverfast disc I received with the Nikon 4000 is version 5.5. When I installed it the menu listed it as v5.5 Or12. The window accessed by the 'info' button said:
SilverFast E-5.5 Or12 Serial
SU-Nikon LS-4000
Licensed to: Job
I downloaded the free upgrade from your web site, installed that, and the menu now lists it as v5.5.2R02. The window accessed by the 'info' button now says:
SilverFast E-5.5.2r02 Serial
SU-Nikon LS-4000
Licensed to: ADF, Job
However at no time was there any reference to optional calibration, nor did I receive another serial number. So how do I access this option?
The only reference I can find anywhere is at http://www.lasersoft-imaging.com/produc ... 00/en.html, where there is the offer of optional calibration for $161. Is this what you are referring to? If so, is it downloadable? And from where? On the web site I can only find ways of having software physically shipped, which is impractical since I am in Moscow. I already have a target transparency, so the best option is download if at all possible.
Thanks,
Jeremy Nicholl