No Printer Calibration with film scanners

General topics about SilverFast

Moderator: LSI_Moeller


dnobel
SilverFast Beginner
Posts: 16
Joined: Fri May 11, 2007 5:25 pm
Location: Oakville, Ontario, Canada

No Printer Calibration with film scanners

Postby dnobel » Fri May 23, 2008 6:52 pm

My initial excitement with the new printer calibration feature in SF 6.6.0 quickly turned to disappointment when the documentation revealed it would not work with film scanners. Although I do own a decent Epson flat bed scanner, I do not have a licensed copy of SilverFast for it, nor do I plan to purchase one just to be able to calibrate my printer. All my critical scanning is done on my Nikon film scanner; the Epson is used strictly for photocopying and scanning office documents into PDFs.

Since many of your customers will doubtless be in the same situation, I'm wondering if you are working on making this feature available to the rest of us.

User avatar
President_LSI
LSI Staff
LSI Staff
Posts: 563
Joined: Sun Jul 22, 2001 1:00 am
Location: Kiel, Germany & Sarasota, Florida
Contact:

SilverFast Scanner-Printer Calibration

Postby President_LSI » Fri May 23, 2008 9:47 pm

New SilverFast Scanner-Printer Calibration

Dear User,

your decent Espson Flatbedscanner as lang as it works with SilverFast, should be good enough to get your Printer calibrated, so that then you can scan with your Nikon film scanner and use the calibrated output from your printer. Look at the Movie: https://www.silverfast.com/go/nl200805/p ... mov?mlid=0

Also, please look into the improvement we have made for Nikon film scanner especially with reference to scanning KODACHROMES more efficiently and with significantly better Dynamic Range.
Please look at the test report here: https://www.silverfast.com/PDF/TestRepor ... ueller.pdf

best regards

Karl-Heinz Zahorsky
President
LaserSoft Imaging


Return to “About SilverFast”

Who is online

Users browsing this forum: No registered users and 1 guest