LaserSoft Imaging

I am using SF 6.0.1r11 with a Nikon LS-2000 on a Mac. The selective color to gray feature is not working in this version. When I select a color (gray tone) to alter, the numbers move up and down on the selective gray panel, but the preview does not change. If I scan the image as RGB, save it and then open it with SF 6 HDR, and convert it to 16 bit grayscale, the image changes in the preview as I select "colors" and alter them.

Since I shoot a lot of color neg that gets printed as B&W, it is very useful to me and I'd like to get this feature working.

Thanks for your help,

Selective color to gray doesn`t work with my Micrtotek 4000TF eiher.Would be a great feature,though.
Stefan

I have the same problem with selective color to gray and my Microtek 4000tf like Stefan.
Uwe

I have the same problem with selective color to gray and my Microtek 4000tf like Stefan.
Uwe

It works OK with HDR but NOT with ANY of the Polaroid models.

It looks like the feature hasn't been activated.

deleted duplicate post

The problem is being investigated by the developers team. Thanks for noticing it.

Thomas

Here is a quick workaround for those who see no effect of SC2G:

Open the "Special" panel in the "Option" dialog.
Chose "Color Filter" as "White".

If you cannot chose "White" here, please wait for our bugfix.

Thanks - the "work-around" works fine...

Thanks for your help,Martin,works now.
But your forum seems to have a problem.Many of the new posts are not indicated as new.That`s very annoying.This thread is reported to have 0 (!) replies!
Stefan