When scanning the 35mm film negative, it is set as a transparency, negative, negafix set to fuji pro 400H, scanner Epson V500
and scanned as 64bit HDRi . Image is scanned and can see the infrared scan occur and finishes successfully. I then switch to
Silverfast HDR 8, configure as film transparency, negative, 64bit HDRi at 6400ppi with negafix set to fuji pro 400H, scanner Epson V500.
While in HDR 8, the image on the screen is shown as normal image, but when processed the image show in all orange tones instead of normal image.
I've tried turning the Gamma on and off and setting to 1 instead of 2.20 without any change.
If I process at 24 or 48 bit ( no infrared ) image then is processed correctly but no iSRD is provided.
I'm running the most current version that I'm aware of SF 8.0.1r17 and HDR 8 - 8.01r17 as well.
I've searched this forum but unable to find what is wrong.
Help would be appreciated.
- Screen shot 2012-11-18 at 11.08.24 AM.jpg (100.33 KiB) Viewed 1914 times
