Search found 209 matches

by LSI_Belli
Fri Oct 14, 2005 12:18 pm
Forum: Polaroid
Topic: periodic 'soft' bands in scans with driver 6.2.2r1
Replies: 17
Views: 17659

Dear All,

here is a colour image where blurry stripes were obtained with the Polaroid SS120 at full resolution (4000dpi).

<img src="/img/forum/1377_1241_polaroidss120_stripes.jpg">


Thomas
by LSI_Belli
Tue Oct 04, 2005 3:36 pm
Forum: New features wishlist
Topic: Microtek 120tf / Polaroid Sprintscan 120 Wishes!
Replies: 1
Views: 1943

Dear Nitro, thanks for your interest in SilverFast and for your proposal. As I already wrote it in another posting concerning the "soft banding" problem, we will investigate this issue again. I just have a few complementary questions: do you observe that the sharpness gets increased only with the fo...
by LSI_Belli
Tue Oct 04, 2005 3:35 pm
Forum: Microtek
Topic: Microtek 120tf: Interesting discovery...!
Replies: 3
Views: 5658

Dear Nitro, thanks for your interest in SilverFast and for your proposal. As I already wrote it in another posting concerning the "soft banding" problem, we will investigate this issue again. I just have a few complementary questions: do you observe that the sharpness gets increased only with the fo...
by LSI_Belli
Tue Oct 04, 2005 3:28 pm
Forum: Polaroid
Topic: periodic 'soft' bands in scans with driver 6.2.2r1
Replies: 17
Views: 17659

Dear Nitro,

we will investigate this issue again in order to clarify, if possible, when this problem exactly occurs and if both scanners (Microtek and Polaroid) are concerned by this problem.

Best,

Thomas
by LSI_Belli
Tue Sep 13, 2005 8:39 am
Forum: About SilverFast
Topic: Vertical streaks during IT8 calibration
Replies: 1
Views: 1532

Hello, I suggest that you contact our support team http://www.silverfast.com/problemreport/en.html You could mention in your message, if you have these stripes when the scan is performed (at the beginning of the calibration) or when the icc profile is applied (at the end of the calibration). Indeed,...
by LSI_Belli
Fri Aug 19, 2005 3:26 pm
Forum: Plustek
Topic: OpticFilm7200 and Quickscan
Replies: 1
Views: 5345

Dear Malejka,

you should check the options of the QuickScan utility software and select another scan software if you wish.

BR
Thomas
by LSI_Belli
Tue Jul 19, 2005 10:40 am
Forum: Plustek
Topic: owerburned highlights
Replies: 2
Views: 4108

Dear Henry, this highlight clipping may be due to different reasons: 1. the scanner (in default status) provides too bright images (e.g. lamp too bright or integration time too long) 2. the software settings lead to information loss in the highlights If the image is overall too bright in the preview...
by LSI_Belli
Thu Feb 10, 2005 2:10 am
Forum: Imaging in general
Topic: Calibrating IT8 Target
Replies: 3
Views: 2737

Dear Friedrich, there is no need to set anything in the "Options / CMS" tab when performing the calibration. The IT8 calibration uses raw scanned data. The only thing which affects the icc profile generated at the end of the calibration is the gamma value set in the "Options / General". Ian Lyons' t...
by LSI_Belli
Wed Feb 09, 2005 9:12 pm
Forum: Minolta
Topic: Auto exposure switch
Replies: 1
Views: 4089

The auto-exposure button enables to perform an automatic measurement of the optimal exposure time. This feature is hardware based and interacts with the scanner. It does not have anything to do with the "brightness" or "exposure" sliders which are "software based". Moreover, only some scanners with ...
by LSI_Belli
Wed Feb 09, 2005 9:06 pm
Forum: About SilverFast
Topic: IT8 calibration
Replies: 1
Views: 1680

Dear Mick, the workflow of the IT8 calibration was changed a long time ago. The user was able to export an icc profile by clicking on the "Export ICC" button (it was optional). Now, one has to save the icc profile for the input calibration. It is not an option anymore, that's why the "Export ICC" bu...
by LSI_Belli
Wed Feb 09, 2005 8:58 pm
Forum: OSX - PANTHER Problems
Topic: Calibrating IT8 Target
Replies: 2
Views: 3959

by LSI_Belli
Wed Feb 09, 2005 8:57 pm
Forum: Imaging in general
Topic: Calibrating IT8 Target
Replies: 3
Views: 2737

Dear Friedrich,

you can find a documentation for the IT8 calibration here:

http://download.silverfast.com/docs/IT8_Guide-en.pdf

(which is up-to-date, I hope :) )

Thanks for your feedback.

BR
Thomas
by LSI_Belli
Wed Feb 09, 2005 8:50 pm
Forum: Epson
Topic: Posterization with slides
Replies: 1
Views: 1672

Dear Peter, At first, you could download the latest version from our website (use the auto-update from SilverFast). If you have an Epson-SE version with color management, switch off the CMS settings in the "Options / CMS" tab for test purposes. If nothing helps, contact our support team at: http://w...
by LSI_Belli
Wed Feb 09, 2005 8:33 pm
Forum: Microtek
Topic: Slooooooow down with i900 and SF AI 6.4.1R2
Replies: 5
Views: 4319

You could check in the "Options / Special" tab, if the option "Scan draft" is available and active.

Our support team will answer asap.

BR
Thomas
by LSI_Belli
Mon Sep 13, 2004 10:20 am
Forum: About SilverFast
Topic: Color Way Off
Replies: 2
Views: 1930

Dear Nick, it seems that your problem is related to the removal of the orange mask. In order to visualize the positive image of the negative, SilverFast automatically removes the orange mask based on the color information in the selected frame. However, you can manually set the thresholds applied to...

Go to advanced search