LaserSoft Imaging

Hi
In general I have pictures where people have pretty red faces on 60s Kodachrome slides. Have you ever had this problem? I use the Nikon Coolscan 9000.

Hi
Why are 10-bit HEIF photos not available in Silverfast Studio HDR?

The problem has already been pointed out, but nothing has been done. I have the latest version.
Your technical service has been sleeping for quite some time!

I have 10 000 slides. Re-edit by hand the name, for each image of the job, and this is a very boring activity and source of errors. 
Can you update SF HDR Studio?

The problem has already been pointed out, but nothing has been done. I have the latest version

Thank you

perhaps for others scanners but in the Nikon Coolscan 9000, no difference

negative number or positive number the automatic detection is poor

Yes an overview

If i use the frame recognition during scanning, there are black edges that are not cut correctly
if i use the frame recognition after scanning,the frame isn't detected correctly

The reset was done, but it did not solve the problem

I know all this. Auto CCR can be improved. There are dominant over the remaining slides that remain undetected.
The auto CCR is not reliable for a large number of slides. Manual processing is possible. But it is not to process 10000 slides in a short time.

Even at 100%, Silverfast HDR does not remove 100% of the dominant colors on the entire slide. The old slides are always blue or magenta. Since the time, the CCR Auto could be improved, it is not luxury !

Then I use HDR Studio 8 and its job manager. Whenever I make a color correction, a crop, manually. The file name changes S4 is replaced by image 1, the file name S890 is replaced by image 1... .

When I say Silverfast Studio HDR 8 it's Silverfast Studio HDR 8 only !

No other software, only Silferfast HDR Studio 8

I have a name
Hdri 64 bits Slide name "S1" when I used SF HDR the name change "image 1"
Hdri Slide name 64"S2". the name change "image 1"...
x 1000 slides

I scan slides with Silverfast 8 and its 64-bit HDRi mode, the file name is S1, S2, S3, S4 ... Then I use HDR Studio 8 and its job manager. Whenever I make a color correction, a crop, manually. The file name changes S4 is replaced by image 1, the file name S890 is replaced by image 1... . It's tiring...

I don't see any difference

How to center the slide ?. Because the lower part is invisible. I have the FH-835m. Silverfast HDR Studio 8

I have a problem with the automatic frame.
50 % errors