Microtek 1800f and SF 6Ai

flatbed scanners for Microtek

photoguy
Visitor
Posts: 1
Joined: Tue Dec 16, 2003 5:35 pm

Microtek 1800f and SF 6Ai

Postby photoguy » Wed Dec 17, 2003 7:31 pm

I'm running an 1800f with sf 6 ai and ps cs. SF keeps hanging up on prescan or runs very slowly. I get a message that sf is not responding but then sometimes the prescan will appear a few seconds later. It seems like sf and the scanner are not in sinc. The one thing that always crashes sf is if I use the zoom buttion. I'm only running the one scanner and have downloaded the latest version of sf several times- 6.1.0r7. I've been able to complete a few scans successfully but the colors are way off and the scan process is very slow. I've dedicated plenty of ram and scratch disk per the faq's but it didn't help. I was able to calibrate with a transparency kodak target using sf but the color is worse than without it. Anybody have similar experiance or any ideas?

User avatar
LSI_Rossee
LSI Staff
LSI Staff
Posts: 303
Joined: Mon Oct 13, 2003 12:14 pm
Location: Kiel, Germany
Contact:

Postby LSI_Rossee » Thu Dec 18, 2003 10:41 am

Dear photoguy.

Which OS are you operating? Can you provide the SF-logfile and possibly some Screenshots of your option parameters for problem analysis to support@silverfast.com.

Kind regards.


Return to “Microtek”

Who is online

Users browsing this forum: No registered users and 1 guest