Dark bands across scans

General topics about imaging

WayneB
Visitor
Posts: 1
Joined: Sat Oct 06, 2012 6:57 pm
Scanner: V700
SilverFast Product: Ai

Dark bands across scans

Postby WayneB » Sun Oct 07, 2012 5:20 am

test.gif
test.gif (167.49 KiB) Viewed 1393 times
After scanning a few hundred 35mm negatives successfully, I now see darker bands across the negative scans. Is this software or hardware related? Any advice would be appreciated. I'm using an Epson V700 with MacBPro and latest OS. Take a look at the scan here and thanks for your help....Wayne

User avatar
LSI_Ketelhohn
LSI Staff
LSI Staff
Posts: 4283
Joined: Wed May 28, 2008 11:19 am
Scanner: all
Location: Kiel, Germany
Contact:

Re: Dark bands across scans

Postby LSI_Ketelhohn » Wed Oct 10, 2012 3:46 pm

Dear customer,

If that suddenly occurs it is most likely a hardware issue.
Have you made sure those shadows are not on the film.

Make sure no devices are attached to the same power socket which might cause a feedback.
Like flourecent lights, devices utilizing strong electrical motors or generally using a lot of power.

Otherwise carefully check if the lamp in the scanner might change colors.
But be aware the lamp is very bright.
Sunglasses might help.

kind regards,
Arne Ketelhohn.

degrub
SilverFast Master
SilverFast Master
Posts: 597
Joined: Fri Dec 21, 2001 1:00 am
Location: Texas

Re: Dark bands across scans

Postby degrub » Fri Oct 12, 2012 12:09 am

Do the bands align with the movement of the scan head ?
i noticed the image is reversed. Any chance that it matters if the film is emulsion side up or down ?

Frank

HarmonyMom
Visitor
Posts: 4
Joined: Tue Aug 23, 2011 6:23 pm
Scanner: Epson Perfection V700 Photo
SilverFast Product: Ai Studio

Re: Dark bands across scans

Postby HarmonyMom » Thu Oct 18, 2012 12:10 pm

1. Rotate one negative 90 degrees and re-scan. Do the bands rotate also? If so, then they are artifacts in the negative and not from the scanner or software.

2. Try scanning with the software provided by Epson, rather than SilverFast. Are the bands still there? If so, then they are not from the software.


Return to “Imaging in general”

Who is online

Users browsing this forum: No registered users and 1 guest