Batch Processing in HDR 8

[boreilly]

Perhaps I am doing something wrong - so please help...

I scan colour negatives with a Nikon 5000 ED in 64 Bit HDRi - with NegaFix set to the film type, which I believe is now 'embedded' into the file.

To process the above files - I use a different Mac running HDR 8 (

How can I correctly 'Batch Process' an entire film I have scanned in the above process?

Currently I open all the files in HDR 8 and then, in the 'Job Manager' window I apply iSRD and NegaFix to the first image.
Again in 'Job Manager' I 'Copy settings of selected frame' (selecting the parameters to copy), select all the other frames and 'Paste settings to selected frame'
Then I press the blue process button and select a destination etc.

Job Manager finishes - but has not applied the settings

So - what am I doing wrong?
Please advise

Best regards

Brian

[LSI_Ketelhohn]

Dear Brian,

In the JobManager you need to use the JobManager's own copy and paste buttons.

Bildschirmfoto 2013-02-05 um 08.48.03.png (4.57 KiB) Viewed 1529 times

kind regards,
Arne Ketelhohn.

[boreilly]

Arne

This is exactly what I do

As I stated in my original post:
"Again in 'Job Manager' I 'Copy settings of selected frame' (selecting the parameters to copy), select all the other frames and 'Paste settings to selected frame'"
I was using the 'Cop'y and 'Paste' buttons in the Job Manager window as you mentioned.

Please - can you actually try to run a few images through HDR 8 and verify that it all works
I am only applying NegaFix anf iSRD in the Batch Process

Also
If it is part of the problem - may I also add that:
When scanning, I specify the film type in NegaFix - according to one of your previous answers, this is stored in the 64 Bit HDRi file
When the image is opened in HDR 8 the correct Film Type is selected - but seems not to have been applied.
If I select and then de-select 'CCR' (for example) in NegaFix then the film type is selected and the image reflects this

Brian

[LSI_Ketelhohn]

Dear Brian,

Are you already using our latest version 8.0.1r20?


kind regards,
Arne Ketelhohn.

[LSI_Ketelhohn]

Dear Brian,

I have forwarded your post to our support system.

kind regards,
Arne Ketelhohn.