SRDX expert mode

[kaffeetrinker]

I use SRDx with manual corrections in expert mode. How it is possible to delete the manual corrections? In Silverfast 8.8.0r2 I disable and enable SRDx anew when scanning a new slide. After reenabling SRDx all manual corrections which I have made for the previous slide are deleted. In Silverfast 8.8.0r3 however the manual corrections are not deleted. Is there any method to delete all manual corrections before scanning an new slide?

[LSI_Ketelhohn]

Dear customer,

In the lower right corner you can find a reset button.
Looks like a recycling symbol.

Kind regards,
Arne Ketelhohn.

[kaffeetrinker]

This button, I suspect, is for setting the values for automatic correction to default values. What I mean is the following. I did some corrections manually in expert mode which has the effect that the dust spots I marked are marked in red color on the pane. The recycling button does not help in eliminating these manually marked spots and also does not reset the values of the expert mode dialog.

[LSI_Ketelhohn]

Dear customer,

you are indeed correct. I have informed our developers about this. We will have to correct this in our next update.
What you can maybe do instead is use the undo function (Mac: CMD+Z ; PC: Ctrl+Z) this will remove the last change you made.


Kind regards,
Arne Ketelhohn.

[kaffeetrinker]

In the meanwhile I found another workaround in resetting the frame.

[bastianra]

The bug still persists in the most recent version (Build number: 17471). It is extremely disappointing that this bug still persists. This bug renders the copy frame tool effectively useless when scanning B&W negatives. This is extremely disruptive as copying frames is the only working method to avoid having to re-enter numerous settings such as scan resolutions, the path at which the scanned image will be stored and other settings.