Multi-Exposure not supported whith ProScan 4000

[Morten]

I have solved the problem.

The problem was related to the Epson ?plastic? negative holder and not to the Silverfast software.

If the negative holder is kept absolutely flat during scanning (by force) then the ?shadow effects? disappears.

Best regards
Morten
Denmark.

[President_LSI]

Dear User,

SilverFast Multi-Exposure does support the ProScan 4000 scanner now:

https://www.silverfast.com/product/en.html?product=435

best regards

Karl-Heinz Zahorsky
President
LaserSoft Imaging

[John Quincy]

<b>SilverFast Multi-Exposure and optical resolution</b>

Dear Morten,

realizing that you scan with 3200 dpi I would like to alert you that you have exceeded the true optical resolution by far. Every scanner manufacturer publishes resolution values that are deluding customers leading to wrong expectations. The true optical resolution for your scanner is in reality less than 2400 dpi.

So for good quality scans I recommend not to exceed the true optical resolution of the Epson Perfection 4870.

If you want to learn more about true optical resolution, look at these links:

http://photo.net/bboard/q-and-a-fetch-m ... 09V1B&tag=

http://aroundcny.com/technofile/texts/tec022303.html

http://www.butzi.net/articles/scannersoft.htm

http://www.kenrockwell.com/1640rez.htm

http://photo.net/bboard/q-and-a-fetch-m ... 09V1B&tag=

With best regards

Karl-Heinz Zahorsky
President & CEO
LaserSoft Imaging AG

Thanks for the link.